summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'for-linus' of ↵jd/xdp-l3Linus Torvalds2020-08-100-0/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ...
| * Merge branch 'next' into for-linusDmitry Torokhov2020-08-0718-271/+153
| |\ | | | | | | | | | Prepare input updates for 5.9 merge window.
* | | mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long2020-08-0718-32/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds2020-08-061-2/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
| * | | sched,crypto: Convert to sched_set_fifo*()Peter Zijlstra2020-06-151-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because SCHED_FIFO is a broken scheduler model (see previous patches) take away the priority field, the kernel can't possibly make an informed decision. Use sched_set_fifo() to request SCHED_FIFO and delegate actual priority selection to userspace. Effectively no change in behaviour. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds2020-08-055-19/+3
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
| * \ \ \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2020-07-251-0/+1
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UDP reuseport conflict was a little bit tricky. The net-next code, via bpf-next, extracted the reuseport handling into a helper so that the BPF sk lookup code could invoke it. At the same time, the logic for reuseport handling of unconnected sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace which changed the logic to carry on the reuseport result into the rest of the lookup loop if we do not return immediately. This requires moving the reuseport_has_conns() logic into the callers. While we are here, get rid of inline directives as they do not belong in foo.c files. The other changes were cases of more straightforward overlapping modifications. Signed-off-by: David S. Miller <davem@davemloft.net>
| * \ \ \ \ Merge branch 'get-rid-of-the-address_space-override-in-setsockopt-v2'David S. Miller2020-07-241-4/+3
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Christoph Hellwig says: ==================== get rid of the address_space override in setsockopt v2 setsockopt is the last place in architecture-independ code that still uses set_fs to force the uaccess routines to operate on kernel pointers. This series adds a new sockptr_t type that can contained either a kernel or user pointer, and which has accessors that do the right thing, and then uses it for setsockopt, starting by refactoring some low-level helpers and moving them over to it before finally doing the main setsockopt method. Note that apparently the eBPF selftests do not even cover this path, so the series has been tested with a testing patch that always copies the data first and passes a kernel pointer. This is something that works for most common sockopts (and is something that the ePBF support relies on), but unfortunately in various corner cases we either don't use the passed in length, or in one case actually copy data back from setsockopt, or in case of bpfilter straight out do not work with kernel pointers at all. Against net-next/master. Changes since v1: - check that users don't pass in kernel addresses - more bpfilter cleanups - cosmetic mptcp tweak ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | net: pass a sockptr_t into ->setsockoptChristoph Hellwig2020-07-241-4/+3
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | Merge branch 'sockopt-cleanups'David S. Miller2020-07-195-15/+0
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Christoph Hellwig says: ==================== sockopt cleanups this series cleans up various lose ends in the sockopt code, most importantly removing the compat_{get,set}sockopt infrastructure in favor of just using in_compat_syscall() in the few places that care. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | net: make ->{get,set}sockopt in proto_ops optionalChristoph Hellwig2020-07-195-15/+0
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just check for a NULL method instead of wiring up sock_no_{get,set}sockopt. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | | Merge tag 'docs-5.9' of git://git.lwn.net/linuxLinus Torvalds2020-08-043-3/+3
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull documentation updates from Jonathan Corbet: "It's been a busy cycle for documentation - hopefully the busiest for a while to come. Changes include: - Some new Chinese translations - Progress on the battle against double words words and non-HTTPS URLs - Some block-mq documentation - More RST conversions from Mauro. At this point, that task is essentially complete, so we shouldn't see this kind of churn again for a while. Unless we decide to switch to asciidoc or something...:) - Lots of typo fixes, warning fixes, and more" * tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits) scripts/kernel-doc: optionally treat warnings as errors docs: ia64: correct typo mailmap: add entry for <alobakin@marvell.com> doc/zh_CN: add cpu-load Chinese version Documentation/admin-guide: tainted-kernels: fix spelling mistake MAINTAINERS: adjust kprobes.rst entry to new location devices.txt: document rfkill allocation PCI: correct flag name docs: filesystems: vfs: correct flag name docs: filesystems: vfs: correct sync_mode flag names docs: path-lookup: markup fixes for emphasis docs: path-lookup: more markup fixes docs: path-lookup: fix HTML entity mojibake CREDITS: Replace HTTP links with HTTPS ones docs: process: Add an example for creating a fixes tag doc/zh_CN: add Chinese translation prefer section doc/zh_CN: add clearing-warn-once Chinese version doc/zh_CN: add admin-guide index doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label futex: MAINTAINERS: Re-add selftests directory ...
| * | | | | | docs: crypto: convert asymmetric-keys.txt to ReSTMauro Carvalho Chehab2020-06-193-3/+3
| | |_|/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This file is almost compatible with ReST. Just minor changes were needed: - Adjust document and titles markups; - Adjust numbered list markups; - Add a comments markup for the Contents section; - Add markups for literal blocks. Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/c2275ea94e0507a01b020ab66dfa824d8b1c2545.1592203650.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* | | | | | Merge branch 'linus' of ↵Linus Torvalds2020-08-0340-444/+456
|\ \ \ \ \ \ | |_|_|/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add support for allocating transforms on a specific NUMA Node - Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users Algorithms: - Drop PMULL based ghash on arm64 - Fixes for building with clang on x86 - Add sha256 helper that does the digest in one go - Add SP800-56A rev 3 validation checks to dh Drivers: - Permit users to specify NUMA node in hisilicon/zip - Add support for i.MX6 in imx-rngc - Add sa2ul crypto driver - Add BA431 hwrng driver - Add Ingenic JZ4780 and X1000 hwrng driver - Spread IRQ affinity in inside-secure and marvell/cesa" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits) crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR hwrng: core - remove redundant initialization of variable ret crypto: x86/curve25519 - Remove unused carry variables crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000 dt-bindings: RNG: Add Ingenic RNG bindings. crypto: caam/qi2 - add module alias crypto: caam - add more RNG hw error codes crypto: caam/jr - remove incorrect reference to caam_jr_register() crypto: caam - silence .setkey in case of bad key length crypto: caam/qi2 - create ahash shared descriptors only once crypto: caam/qi2 - fix error reporting for caam_hash_alloc crypto: caam - remove deadcode on 32-bit platforms crypto: ccp - use generic power management crypto: xts - Replace memcpy() invocation with simple assignment crypto: marvell/cesa - irq balance crypto: inside-secure - irq balance crypto: ecc - SP800-56A rev 3 local public key validation crypto: dh - SP800-56A rev 3 local public key validation crypto: dh - check validity of Z before export lib/mpi: Add mpi_sub_ui() ...
| * | | | | crypto: xts - Replace memcpy() invocation with simple assignmentArd Biesheuvel2020-07-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Colin reports that the memcpy() call in xts_cts_final() trigggers a "Overlapping buffer in memory copy" warning in Coverity, which is a false postive, given that tail is guaranteed to be smaller than or equal to the distance between source and destination. However, given that any additional bytes that we copy will be ignored anyway, we can simply copy XTS_BLOCK_SIZE unconditionally, which means we can use struct assignment of the array members instead, which is likely to be more efficient as well. Addresses-Coverity: ("Overlapping buffer in memory copy") Fixes: 8118cd4cf772 ("crypto: xts - add support for ciphertext stealing") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: ecc - SP800-56A rev 3 local public key validationStephan Müller2020-07-312-1/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the generation of a local public key, SP800-56A rev 3 section 5.6.2.1.3 mandates a validation of that key with a full validation compliant to section 5.6.2.3.3. Only if the full validation passes, the key is allowed to be used. The patch adds the full key validation compliant to 5.6.2.3.3 and performs the required check on the generated public key. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: dh - SP800-56A rev 3 local public key validationStephan Müller2020-07-311-25/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the generation of a local public key, SP800-56A rev 3 section 5.6.2.1.3 mandates a validation of that key with a full validation compliant to section 5.6.2.3.1. Only if the full validation passes, the key is allowed to be used. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: dh - check validity of Z before exportStephan Müller2020-07-311-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SP800-56A rev3 section 5.7.1.1 step 2 mandates that the validity of the calculated shared secret is verified before the data is returned to the caller. This patch adds the validation check. Signed-off-by: Stephan Mueller <smueller@chronox.de> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: ecdh - check validity of Z before exportStephan Müller2020-07-311-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SP800-56A rev3 section 5.7.1.2 step 2 mandates that the validity of the calculated shared secret is verified before the data is returned to the caller. Thus, the export function and the validity check functions are reversed. In addition, the sensitive variables of priv and rand_z are zeroized. Signed-off-by: Stephan Mueller <smueller@chronox.de> Reviewed-by: Vitaly Chikunov <vt@altlinux.org> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: testmgr - delete duplicated wordsRandy Dunlap2020-07-231-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delete the doubled word "from" in multiple places. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: Replace HTTP links with HTTPS onesAlexander A. Klimov2020-07-238-32/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | padata: fold padata_alloc_possible() into padata_alloc()Daniel Jordan2020-07-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's no reason to have two interfaces when there's only one caller. Removing _possible saves text and simplifies future changes. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | padata: remove stop functionDaniel Jordan2020-07-231-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | padata_stop() has two callers and is unnecessary in both cases. When pcrypt calls it before padata_free(), it's being unloaded so there are no outstanding padata jobs[0]. When __padata_free() calls it, it's either along the same path or else pcrypt initialization failed, which of course means there are also no outstanding jobs. Removing it simplifies padata and saves text. [0] https://lore.kernel.org/linux-crypto/20191119225017.mjrak2fwa5vccazl@gondor.apana.org.au/ Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | padata: remove start functionDaniel Jordan2020-07-231-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | padata_start() is only used right after pcrypt allocates an instance with all possible CPUs, when PADATA_INVALID can't happen, so there's no need for a separate "start" step. It can be done during allocation to save text, make using padata easier, and avoid unneeded calls in the future. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: lrw - prefix function and struct names with "lrw"Eric Biggers2020-07-161-58/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Overly-generic names can cause problems like naming collisions, confusing crash reports, and reduced grep-ability. E.g. see commit ccf5a2ec44cb ("crypto - Avoid free() namespace collision"). Clean this up for the lrw template by prefixing the names with "lrw_". (I didn't use "crypto_lrw_" instead because that seems overkill.) Also constify the tfm context in a couple places. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: xts - prefix function and struct names with "xts"Eric Biggers2020-07-161-65/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Overly-generic names can cause problems like naming collisions, confusing crash reports, and reduced grep-ability. E.g. see commit ccf5a2ec44cb ("crypto - Avoid free() namespace collision"). Clean this up for the xts template by prefixing the names with "xts_". (I didn't use "crypto_xts_" instead because that seems overkill.) Also constify the tfm context in a couple places, and make xts_free_instance() use the instance context structure so that it doesn't just assume the crypto_skcipher_spawn is at the beginning. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: algapi - add NEED_FALLBACK to INHERITED_FLAGSEric Biggers2020-07-163-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRYPTO_ALG_NEED_FALLBACK is handled inconsistently. When it's requested to be clear, some templates propagate that request to child algorithms, while others don't. It's apparently desired for NEED_FALLBACK to be propagated, to avoid deadlocks where a module tries to load itself while it's being initialized, and to avoid unnecessarily complex fallback chains where we have e.g. cbc-aes-$driver falling back to cbc(aes-$driver) where aes-$driver itself falls back to aes-generic, instead of cbc-aes-$driver simply falling back to cbc(aes-generic). There have been a number of fixes to this effect: commit 4e20b8b65210 ("crypto: xts - Propagate NEED_FALLBACK bit") commit 25fe465280e3 ("crypto: ctr - Propagate NEED_FALLBACK bit") commit cf197f2b42c6 ("crypto: cbc - Propagate NEED_FALLBACK bit") But it seems that other templates can have the same problems too. To avoid this whack-a-mole, just add NEED_FALLBACK to INHERITED_FLAGS so that it's always inherited. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: algapi - use common mechanism for inheriting flagsEric Biggers2020-07-1622-227/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The flag CRYPTO_ALG_ASYNC is "inherited" in the sense that when a template is instantiated, the template will have CRYPTO_ALG_ASYNC set if any of the algorithms it uses has CRYPTO_ALG_ASYNC set. We'd like to add a second flag (CRYPTO_ALG_ALLOCATES_MEMORY) that gets "inherited" in the same way. This is difficult because the handling of CRYPTO_ALG_ASYNC is hardcoded everywhere. Address this by: - Add CRYPTO_ALG_INHERITED_FLAGS, which contains the set of flags that have these inheritance semantics. - Add crypto_algt_inherited_mask(), for use by template ->create() methods. It returns any of these flags that the user asked to be unset and thus must be passed in the 'mask' to crypto_grab_*(). - Also modify crypto_check_attr_type() to handle computing the 'mask' so that most templates can just use this. - Make crypto_grab_*() propagate these flags to the template instance being created so that templates don't have to do this themselves. Make crypto/simd.c propagate these flags too, since it "wraps" another algorithm, similar to a template. Based on a patch by Mikulas Patocka <mpatocka@redhat.com> (https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: seqiv - remove seqiv_create()Eric Biggers2020-07-161-15/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | seqiv_create() is pointless because it just checks that the template is being instantiated as an AEAD, then calls seqiv_aead_create(). But seqiv_aead_create() does the exact same check, via aead_geniv_alloc(). Just remove seqiv_create() and use seqiv_aead_create() directly. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: geniv - remove unneeded arguments from aead_geniv_alloc()Eric Biggers2020-07-163-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The type and mask arguments to aead_geniv_alloc() are always 0, so remove them. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: api - permit users to specify numa node of acomp hardwareBarry Song2020-07-093-13/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For a Linux server with NUMA, there are possibly multiple (de)compressors which are either local or remote to some NUMA node. Some drivers will automatically use the (de)compressor near the CPU calling acomp_alloc(). However, it is not necessarily correct because users who send acomp_req could be from different NUMA node with the CPU which allocates acomp. Just like kernel has kmalloc() and kmalloc_node(), here crypto can have same support. Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: af_alg - Fix regression on empty requestsHerbert Xu2020-07-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some user-space programs rely on crypto requests that have no control metadata. This broke when a check was added to require the presence of control metadata with the ctx->init flag. This patch fixes the regression by setting ctx->init as long as one sendmsg(2) has been made, with or without a control message. Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: a52eb0489f96 ("crypto: algif_aead - Only wake up when...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | | crypto: algif_aead - Only wake up when ctx->more is zeroHerbert Xu2020-06-183-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AEAD does not support partial requests so we must not wake up while ctx->more is set. In order to distinguish between the case of no data sent yet and a zero-length request, a new init flag has been added to ctx. SKCIPHER has also been modified to ensure that at least a block of data is available if there is more data to come. Fixes: c1b1fa586429 ("crypto: af_alg - consolidation of...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | | | | keys: asymmetric: fix error return code in software_key_query()Wei Yongjun2020-07-151-0/+1
| |_|/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix to return negative error code -ENOMEM from kmalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: 1bef742086ae ("X.509: parse public key parameters from x509 for akcipher") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | Merge tag 'irq-urgent-2020-07-05' of ↵Linus Torvalds2020-07-050-0/+0
|\ \ \ \ \ | |/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - Ensure the atomicity of affinity updates in the GIC driver - Don't try to sleep in atomic context when waiting for the GICv4.1 to respond. Use polling instead. - Typo fixes in Kconfig and warnings" * tag 'irq-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic: Atomically update affinity irqchip/riscv-intc: Fix a typo in a pr_warn() irqchip/gic-v4.1: Use readx_poll_timeout_atomic() to fix sleep in atomic irqchip/loongson-pci-msi: Fix a typo in Kconfig
| * | | | Merge tag 'irqchip-fixes-5.8-1' of ↵Thomas Gleixner2020-06-3016-169/+570
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix atomicity of affinity update in the GIC driver - Don't sleep in atomic when waiting for a GICv4.1 RD to respond - Fix a couple of typos in user-visible messages
* | | | | crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock()Herbert Xu2020-06-184-33/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The locking in af_alg_release_parent is broken as the BH socket lock can only be taken if there is a code-path to handle the case where the lock is owned by process-context. Instead of adding such handling, we can fix this by changing the ref counts to atomic_t. This patch also modifies the main refcnt to include both normal and nokey sockets. This way we don't have to fudge the nokey ref count when a socket changes from nokey to normal. Credits go to Mauricio Faria de Oliveira who diagnosed this bug and sent a patch for it: https://lore.kernel.org/linux-crypto/20200605161657.535043-1-mfo@canonical.com/ Reported-by: Brian Moyles <bmoyles@netflix.com> Reported-by: Mauricio Faria de Oliveira <mfo@canonical.com> Fixes: a2ce15b668c6 ("crypto: af_alg - Use bh_lock_sock in...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | | | crypto: drbg - always try to free Jitter RNG instanceStephan Müller2020-06-151-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Jitter RNG is unconditionally allocated as a seed source follwoing the patch ffb82d3279a8. Thus, the instance must always be deallocated. Reported-by: syzbot+2e635807decef724a1fa@syzkaller.appspotmail.com Fixes: ffb82d3279a8 ("crypto: drbg - always seeded with SP800-90B ...") Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | | | crypto: algboss - don't wait during notifier callbackEric Biggers2020-06-151-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a crypto template needs to be instantiated, CRYPTO_MSG_ALG_REQUEST is sent to crypto_chain. cryptomgr_schedule_probe() handles this by starting a thread to instantiate the template, then waiting for this thread to complete via crypto_larval::completion. This can deadlock because instantiating the template may require loading modules, and this (apparently depending on userspace) may need to wait for the crc-t10dif module (lib/crc-t10dif.c) to be loaded. But crc-t10dif's module_init function uses crypto_register_notifier() and therefore takes crypto_chain.rwsem for write. That can't proceed until the notifier callback has finished, as it holds this semaphore for read. Fix this by removing the wait on crypto_larval::completion from within cryptomgr_schedule_probe(). It's actually unnecessary because crypto_alg_mod_lookup() calls crypto_larval_wait() itself after sending CRYPTO_MSG_ALG_REQUEST. This only actually became a problem in v4.20 due to commit b76377543b73 ("crc-t10dif: Pick better transform if one becomes available"), but the unnecessary wait was much older. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207159 Reported-by: Mike Gerow <gerow@google.com> Fixes: 582802f3e378 ("crypto: algapi - Move larval completion into algboss") Cc: <stable@vger.kernel.org> # v3.6+ Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: Kai Lüke <kai@kinvolk.io> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | | | crypto: algif_skcipher - Cap recv SG list at ctx->usedHerbert Xu2020-06-151-5/+1
| |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Somewhere along the line the cap on the SG list length for receive was lost. This patch restores it and removes the subsequent test which is now redundant. Fixes: c1b1fa586429 ("crypto: af_alg - consolidation of...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | | Merge branch 'rwonce/rework' of ↵Linus Torvalds2020-06-101-1/+0
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/will/linux Pull READ/WRITE_ONCE rework from Will Deacon: "This the READ_ONCE rework I've been working on for a while, which bumps the minimum GCC version and improves code-gen on arm64 when stack protector is enabled" [ Side note: I'm _really_ tempted to raise the minimum gcc version to 4.9, so that we can just say that we require _Generic() support. That would allow us to more cleanly handle a lot of the cases where we depend on very complex macros with 'sizeof' or __builtin_choose_expr() with __builtin_types_compatible_p() etc. This branch has a workaround for sparse not handling _Generic(), either, but that was already fixed in the sparse development branch, so it's really just gcc-4.9 that we'd require. - Linus ] * 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse compiler_types.h: Optimize __unqual_scalar_typeof compilation time compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long) compiler-types.h: Include naked type in __pick_integer_type() match READ_ONCE: Fix comment describing 2x32-bit atomicity gcov: Remove old GCC 3.4 support arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros READ_ONCE: Drop pointer qualifiers when reading from scalar types READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE() arm64: csum: Disable KASAN for do_csum() fault_inject: Don't rely on "return value" from WRITE_ONCE() net: tls: Avoid assigning 'const' pointer to non-const pointer netfilter: Avoid assigning 'const' pointer to non-const pointer compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
| * | | | compiler/gcc: Raise minimum GCC version for kernel builds to 4.8Will Deacon2020-04-151-1/+0
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is very rare to see versions of GCC prior to 4.8 being used to build the mainline kernel. These old compilers are also know to have codegen issues which can lead to silent miscompilation: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 Raise the minimum GCC version for kernel build to 4.8 and remove some tautological Kconfig dependencies as a consequence. Cc: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Will Deacon <will@kernel.org>
* | | | Merge tag 'efi-core-2020-06-01' of ↵Linus Torvalds2020-06-010-0/+0
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The EFI changes for this cycle are: - preliminary changes for RISC-V - Add support for setting the resolution on the EFI framebuffer - Simplify kernel image loading for arm64 - Move .bss into .data via the linker script instead of relying on symbol annotations. - Get rid of __pure getters to access global variables - Clean up the config table matching arrays - Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently - Simplify and unify initrd loading - Parse the builtin command line on x86 (if provided) - Implement printk() support, including support for wide character strings - Simplify GDT handling in early mixed mode thunking code - Some other minor fixes and cleanups" * tag 'efi-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits) efi/x86: Don't blow away existing initrd efi/x86: Drop the special GDT for the EFI thunk efi/libstub: Add missing prototype for PE/COFF entry point efi/efivars: Add missing kobject_put() in sysfs entry creation error path efi/libstub: Use pool allocation for the command line efi/libstub: Don't parse overlong command lines efi/libstub: Use snprintf with %ls to convert the command line efi/libstub: Get the exact UTF-8 length efi/libstub: Use %ls for filename efi/libstub: Add UTF-8 decoding to efi_puts efi/printf: Add support for wchar_t (UTF-16) efi/gop: Add an option to list out the available GOP modes efi/libstub: Add definitions for console input and events efi/libstub: Implement printk-style logging efi/printf: Turn vsprintf into vsnprintf efi/printf: Abort on invalid format efi/printf: Refactor code to consolidate padding and output efi/printf: Handle null string input efi/printf: Factor out integer argument retrieval efi/printf: Factor out width/precision parsing ...
| * \ \ \ Merge tag 'v5.7-rc7' into efi/core, to refresh the branch and pick up fixesIngo Molnar2020-05-252-6/+6
| |\ \ \ \ | | | |_|/ | | |/| | | | | | | Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | Merge tag 'efi-next' of ↵Ingo Molnar2020-04-2518-267/+149
| |\ \ \ \ | | | |/ / | | |/| / | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core Pull EFI changes for v5.8 from Ard Biesheuvel: "- preliminary changes for RISC-V - add support for setting the resolution on the EFI framebuffer - simplify kernel image loading for arm64 - Move .bss into .data via the linker script instead of relying on symbol annotations. - Get rid of __pure getters to access global variables - Clean up the config table matching arrays" Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | | Merge tag 'core-rcu-2020-06-01' of ↵Linus Torvalds2020-06-010-0/+0
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The RCU updates for this cycle were: - RCU-tasks update, including addition of RCU Tasks Trace for BPF use and TASKS_RUDE_RCU - kfree_rcu() updates. - Remove scheduler locking restriction - RCU CPU stall warning updates. - Torture-test updates. - Miscellaneous fixes and other updates" * tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits) rcu: Allow for smp_call_function() running callbacks from idle rcu: Provide rcu_irq_exit_check_preempt() rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter() rcu: Provide __rcu_is_watching() rcu: Provide rcu_irq_exit_preempt() rcu: Make RCU IRQ enter/exit functions rely on in_nmi() rcu/tree: Mark the idle relevant functions noinstr x86: Replace ist_enter() with nmi_enter() x86/mce: Send #MC singal from task work x86/entry: Get rid of ist_begin/end_non_atomic() sched,rcu,tracing: Avoid tracing before in_nmi() is correct sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception lockdep: Always inline lockdep_{off,on}() hardirq/nmi: Allow nested nmi_enter() arm64: Prepare arch_nmi_enter() for recursion printk: Disallow instrumenting print_nmi_enter() printk: Prepare for nested printk_nmi_enter() rcutorture: Convert ULONG_CMP_LT() to time_before() torture: Add a --kasan argument torture: Save a few lines by using config_override_param initially ...
| * \ \ \ Merge tag 'noinstr-lds-2020-05-19' into core/rcuThomas Gleixner2020-05-192-6/+6
| |\ \ \ \ | | | |_|/ | | |/| | | | | | | Get the noinstr section and annotation markers to base the RCU parts on.
| * | | | Merge branch 'for-mingo' of ↵Thomas Gleixner2020-05-1118-267/+149
| |\ \ \ \ | | |_|/ / | |/| | / | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul McKenney: 1. Miscellaneous fixes. 2. kfree_rcu() updates. 3. Remove scheduler locking restriction 4. RCU-tasks update, including addition of RCU Tasks Trace for BPF use and RCU Tasks Rude. (This branch is on top of #3 due to overlap of changed code.) 5. RCU CPU stall warning updates. 6. Torture-test updates.
* | | | Merge branch 'linus' of ↵Linus Torvalds2020-06-0116-168/+570
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Introduce crypto_shash_tfm_digest() and use it wherever possible. - Fix use-after-free and race in crypto_spawn_alg. - Add support for parallel and batch requests to crypto_engine. Algorithms: - Update jitter RNG for SP800-90B compliance. - Always use jitter RNG as seed in drbg. Drivers: - Add Arm CryptoCell driver cctrng. - Add support for SEV-ES to the PSP driver in ccp" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits) crypto: hisilicon - fix driver compatibility issue with different versions of devices crypto: engine - do not requeue in case of fatal error crypto: cavium/nitrox - Fix a typo in a comment crypto: hisilicon/qm - change debugfs file name from qm_regs to regs crypto: hisilicon/qm - add DebugFS for xQC and xQE dump crypto: hisilicon/zip - add debugfs for Hisilicon ZIP crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC crypto: hisilicon/qm - add debugfs to the QM state machine crypto: hisilicon/qm - add debugfs for QM crypto: stm32/crc32 - protect from concurrent accesses crypto: stm32/crc32 - don't sleep in runtime pm crypto: stm32/crc32 - fix multi-instance crypto: stm32/crc32 - fix run-time self test issue. crypto: stm32/crc32 - fix ext4 chksum BUG_ON() crypto: hisilicon/zip - Use temporary sqe when doing work crypto: hisilicon - add device error report through abnormal irq crypto: hisilicon - remove codes of directly report device errors through MSI crypto: hisilicon - QM memory management optimization crypto: hisilicon - unify initial value assignment into QM ...
| * | | crypto: engine - do not requeue in case of fatal errorIuliana Prodan2020-05-281-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, in crypto-engine, if hardware queue is full (-ENOSPC), requeue request regardless of MAY_BACKLOG flag. If hardware throws any other error code (like -EIO, -EINVAL, -ENOMEM, etc.) only MAY_BACKLOG requests are enqueued back into crypto-engine's queue, since the others can be dropped. The latter case can be fatal error, so those cannot be recovered from. For example, in CAAM driver, -EIO is returned in case the job descriptor is broken, so there is no possibility to fix the job descriptor. Therefore, these errors might be fatal error, so we shouldn’t requeue the request. This will just be pass back and forth between crypto-engine and hardware. Fixes: 0eadd1eb3fd1 ("crypto: engine - support for parallel requests based on retry mechanism") Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reported-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 01:51:26 +0000