summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* crypto: kpp - provide support for KPP spawnsNicolai Stange2022-03-031-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The upcoming support for the RFC 7919 ffdhe group parameters will be made available in the form of templates like "ffdhe2048(dh)", "ffdhe3072(dh)" and so on. Template instantiations thereof would wrap the inner "dh" kpp_alg and also provide kpp_alg services to the outside again. The primitves needed for providing kpp_alg services from template instances have been introduced with the previous patch. Continue this work now and implement everything needed for enabling template instances to make use of inner KPP algorithms like "dh". More specifically, define a struct crypto_kpp_spawn in close analogy to crypto_skcipher_spawn, crypto_shash_spawn and alike. Implement a crypto_grab_kpp() and crypto_drop_kpp() pair for binding such a spawn to some inner kpp_alg and for releasing it respectively. Template implementations can instantiate transforms from the underlying kpp_alg by means of the new crypto_spawn_kpp(). Finally, provide the crypto_spawn_kpp_alg() helper for accessing a spawn's underlying kpp_alg during template instantiation. Annotate everything with proper kernel-doc comments, even though include/crypto/internal/kpp.h is not considered for the generated docs. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: kpp - provide support for KPP template instancesNicolai Stange2022-03-031-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The upcoming support for the RFC 7919 ffdhe group parameters will be made available in the form of templates like "ffdhe2048(dh)", "ffdhe3072(dh)" and so on. Template instantiations thereof would wrap the inner "dh" kpp_alg and also provide kpp_alg services to the outside again. Furthermore, it might be perhaps be desirable to provide KDF templates in the future, which would similarly wrap an inner kpp_alg and present themselves to the outside as another kpp_alg, transforming the shared secret on its way out. Introduce the bits needed for supporting KPP template instances. Everything related to inner kpp_alg spawns potentially being held by such template instances will be deferred to a subsequent patch in order to facilitate review. Define struct struct kpp_instance in close analogy to the already existing skcipher_instance, shash_instance and alike, but wrapping a struct kpp_alg. Implement the new kpp_register_instance() template instance registration primitive. Provide some helper functions for - going back and forth between a generic struct crypto_instance and the new struct kpp_instance, - obtaining the instantiating kpp_instance from a crypto_kpp transform and - for accessing a given kpp_instance's implementation specific context data. Annotate everything with proper kernel-doc comments, even though include/crypto/internal/kpp.h is not considered for the generated docs. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: engine - check if BH is disabled during completionCorentin Labbe2022-03-031-0/+1
| | | | | | | | | | | | | When doing iperf over ipsec with crypto hardware sun8i-ce, I hit some spinlock recursion bug. This is due to completion function called with enabled BH. Add check a to detect this. Fixes: 0a3eb652fbcb ("crypto: engine - Introduce the block request crypto engine framework") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: lrw - Add dependency on ecbHerbert Xu2022-02-182-0/+2
| | | | | | | The lrw template relies on ecb to work. So we need to declare a Kconfig dependency as well as a module softdep on it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: xts - Add softdep on ecbHerbert Xu2022-02-181-0/+1
| | | | | | | | | The xts module needs ecb to be present as it's meant to work on top of ecb. This patch adds a softdep so ecb can be included automatically into the initramfs. Reported-by: rftc <rftc@gmx.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: hmac - disallow keys < 112 bits in FIPS modeStephan Müller2022-02-112-0/+13
| | | | | | | | | | | | FIPS 140 requires a minimum security strength of 112 bits. This implies that the HMAC key must not be smaller than 112 in FIPS mode. This restriction implies that the test vectors for HMAC that have a key that is smaller than 112 bits must be disabled when FIPS support is compiled. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: hmac - add fips_skip supportStephan Müller2022-02-112-0/+5
| | | | | | | | | By adding the support for the flag fips_skip, hash / HMAC test vectors may be marked to be not applicable in FIPS mode. Such vectors are silently skipped in FIPS mode. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: tcrypt - remove all multibuffer ahash testsTianjia Zhang2022-02-051-224/+0
| | | | | | | | | | The multibuffer algorithms was removed already in 2018, so it is necessary to clear the test code left by tcrypt. Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: memneq - avoid implicit unaligned accessesArd Biesheuvel2022-01-311-7/+15
| | | | | | | | | | | | | | | | | | | | | The C standard does not support dereferencing pointers that are not aligned with respect to the pointed-to type, and doing so is technically undefined behavior, even if the underlying hardware supports it. This means that conditionally dereferencing such pointers based on whether CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y is not the right thing to do, and actually results in alignment faults on ARM, which are fixed up on a slow path. Instead, we should use the unaligned accessors in such cases: on architectures that don't care about alignment, they will result in identical codegen whereas, e.g., codegen on ARM will avoid doubleword loads and stores but use ordinary ones, which are able to tolerate misalignment. Link: https://lore.kernel.org/linux-crypto/CAHk-=wiKkdYLY0bv+nXrcJz3NH9mAqPAafX7PpW5EwVtxsEu7Q@mail.gmail.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: authenc - Fix sleep in atomic context in decrypt_tailHerbert Xu2022-01-311-1/+1
| | | | | | | | | | | | | | | The function crypto_authenc_decrypt_tail discards its flags argument and always relies on the flags from the original request when starting its sub-request. This is clearly wrong as it may cause the SLEEPABLE flag to be set when it shouldn't. Fixes: c53e75d5b112 ("crypto: authenc - Convert to new AEAD interface") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: rsa-pkcs1pad - use clearer variable namesEric Biggers2022-01-311-15/+16
| | | | | | | | | | | | The new convention for akcipher_alg::verify makes it unclear which values are the lengths of the signature and digest. Add local variables to make it clearer what is going on. Also rename the digest_size variable in pkcs1pad_sign(), as it is actually the digest *info* size, not the digest size which is different. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: rsa-pkcs1pad - fix buffer overread in pkcs1pad_verify_complete()Eric Biggers2022-01-311-0/+2
| | | | | | | | | | | Before checking whether the expected digest_info is present, we need to check that there are enough bytes remaining. Fixes: 39669c60ba49 ("crypto: Add hash param to pkcs1pad") Cc: <stable@vger.kernel.org> # v4.6+ Cc: Tadeusz Struk <tadeusz.struk@linaro.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: rsa-pkcs1pad - restore signature length checkEric Biggers2022-01-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | RSA PKCS#1 v1.5 signatures are required to be the same length as the RSA key size. RFC8017 specifically requires the verifier to check this (https://datatracker.ietf.org/doc/html/rfc8017#section-8.2.2). Commit 39669c60ba49 ("crypto: Add hash param to pkcs1pad") changed the kernel to allow longer signatures, but didn't explain this part of the change; it seems to be unrelated to the rest of the commit. Revert this change, since it doesn't appear to be correct. We can be pretty sure that no one is relying on overly-long signatures (which would have to be front-padded with zeroes) being supported, given that they would have been broken since commit 5bb3d56f3518 ("crypto: akcipher - new verify API for public key algorithms"). Fixes: 39669c60ba49 ("crypto: Add hash param to pkcs1pad") Cc: <stable@vger.kernel.org> # v4.6+ Cc: Tadeusz Struk <tadeusz.struk@linaro.org> Suggested-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: rsa-pkcs1pad - correctly get hash from source scatterlistEric Biggers2022-01-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 5bb3d56f3518 ("crypto: akcipher - new verify API for public key algorithms") changed akcipher_alg::verify to take in both the signature and the actual hash and do the signature verification, rather than just return the hash expected by the signature as was the case before. To do this, it implemented a hack where the signature and hash are concatenated with each other in one scatterlist. Obviously, for this to work correctly, akcipher_alg::verify needs to correctly extract the two items from the scatterlist it is given. Unfortunately, it doesn't correctly extract the hash in the case where the signature is longer than the RSA key size, as it assumes that the signature's length is equal to the RSA key size. This causes a prefix of the hash, or even the entire hash, to be taken from the *signature*. (Note, the case of a signature longer than the RSA key size should not be allowed in the first place; a separate patch will fix that.) It is unclear whether the resulting scheme has any useful security properties. Fix this by correctly extracting the hash from the scatterlist. Fixes: 5bb3d56f3518 ("crypto: akcipher - new verify API for public key algorithms") Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: rsa-pkcs1pad - only allow with rsaEric Biggers2022-01-311-0/+5
| | | | | | | | | | | The pkcs1pad template can be instantiated with an arbitrary akcipher algorithm, which doesn't make sense; it is specifically an RSA padding scheme. Make it check that the underlying algorithm really is RSA. Fixes: 7185f32fb45d ("crypto: rsa - RSA padding algorithm") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: kdf - Select hmac in addition to sha256Herbert Xu2022-01-311-0/+1
| | | | | | | | | | In addition to sha256 we must also enable hmac for the kdf self-test to work. Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: a99a1410a1ba ("crypto: kdf - select SHA-256 required...") Fixes: 3422d95e2c33 ("crypto: kdf - add SP800-108 counter key...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: testmgr - Move crypto_simd_disabled_for_test outHerbert Xu2022-01-312-3/+6
| | | | | | | | | | | | | | | | As testmgr is part of cryptomgr which was designed to be unloadable as a module, it shouldn't export any symbols for other crypto modules to use as that would prevent it from being unloaded. All its functionality is meant to be accessed through notifiers. The symbol crypto_simd_disabled_for_test was added to testmgr which caused it to be pinned as a module if its users were also loaded. This patch moves it out of testmgr and into crypto/algapi.c so cryptomgr can again be unloaded and replaced on demand. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: tcrypt - add asynchronous speed test for SM3Tianjia Zhang2022-01-281-5/+9
| | | | | | | | | | | | tcrypt supports testing of SM3 hash algorithms that use AVX instruction acceleration. In order to add the sm3 asynchronous test to the appropriate position, shift the testcase sequence number of the multi buffer backward and start from 450. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: x86/sm3 - add AVX assembly implementationTianjia Zhang2022-01-281-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds AVX assembly accelerated implementation of SM3 secure hash algorithm. From the benchmark data, compared to pure software implementation sm3-generic, the performance increase is up to 38%. The main algorithm implementation based on SM3 AES/BMI2 accelerated work by libgcrypt at: https://gnupg.org/software/libgcrypt/index.html Benchmark on Intel i5-6200U 2.30GHz, performance data of two implementations, pure software sm3-generic and sm3-avx acceleration. The data comes from the 326 mode and 422 mode of tcrypt. The abscissas are different lengths of per update. The data is tabulated and the unit is Mb/s: update-size | 16 64 256 1024 2048 4096 8192 ------------+------------------------------------------------------- sm3-generic | 105.97 129.60 182.12 189.62 188.06 193.66 194.88 sm3-avx | 119.87 163.05 244.44 260.92 257.60 264.87 265.88 Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: sm3 - make dependent on sm3 libraryTianjia Zhang2022-01-282-127/+16
| | | | | | | | | | SM3 generic library is stand-alone implementation, it is necessary making the sm3-generic implementation to depends on SM3 library. The functions crypto_sm3_*() provided by sm3_generic is no longer exported. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: sm2 - make dependent on sm3 libraryTianjia Zhang2022-01-282-20/+20
| | | | | | | | | SM3 generic library is stand-alone implementation, it is necessary for the calculation of sm2 z digest to depends on SM3 library instead of sm3-generic. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* lib/crypto: add prompts back to crypto librariesJustin M. Forbes2022-01-181-2/+0
| | | | | | | | | | | | | | | | Commit 21e8583d107db ("lib/crypto: blake2s: include as built-in") took away a number of prompt texts from other crypto libraries. This makes values flip from built-in to module when oldconfig runs, and causes problems when these crypto libs need to be built in for thingslike BIG_KEYS. Fixes: 21e8583d107db ("lib/crypto: blake2s: include as built-in") Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org> [Jason: - moved menu into submenu of lib/ instead of root menu - fixed chacha sub-dependencies for CONFIG_CRYPTO] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* Merge branch 'signal-for-v5.17' of ↵Linus Torvalds2022-01-171-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull signal/exit/ptrace updates from Eric Biederman: "This set of changes deletes some dead code, makes a lot of cleanups which hopefully make the code easier to follow, and fixes bugs found along the way. The end-game which I have not yet reached yet is for fatal signals that generate coredumps to be short-circuit deliverable from complete_signal, for force_siginfo_to_task not to require changing userspace configured signal delivery state, and for the ptrace stops to always happen in locations where we can guarantee on all architectures that the all of the registers are saved and available on the stack. Removal of profile_task_ext, profile_munmap, and profile_handoff_task are the big successes for dead code removal this round. A bunch of small bug fixes are included, as most of the issues reported were small enough that they would not affect bisection so I simply added the fixes and did not fold the fixes into the changes they were fixing. There was a bug that broke coredumps piped to systemd-coredump. I dropped the change that caused that bug and replaced it entirely with something much more restrained. Unfortunately that required some rebasing. Some successes after this set of changes: There are few enough calls to do_exit to audit in a reasonable amount of time. The lifetime of struct kthread now matches the lifetime of struct task, and the pointer to struct kthread is no longer stored in set_child_tid. The flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is removed. Issues where task->exit_code was examined with signal->group_exit_code should been examined were fixed. There are several loosely related changes included because I am cleaning up and if I don't include them they will probably get lost. The original postings of these changes can be found at: https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org I trimmed back the last set of changes to only the obviously correct once. Simply because there was less time for review than I had hoped" * 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits) ptrace/m68k: Stop open coding ptrace_report_syscall ptrace: Remove unused regs argument from ptrace_report_syscall ptrace: Remove second setting of PT_SEIZED in ptrace_attach taskstats: Cleanup the use of task->exit_code exit: Use the correct exit_code in /proc/<pid>/stat exit: Fix the exit_code for wait_task_zombie exit: Coredumps reach do_group_exit exit: Remove profile_handoff_task exit: Remove profile_task_exit & profile_munmap signal: clean up kernel-doc comments signal: Remove the helper signal_group_exit signal: Rename group_exit_task group_exec_task coredump: Stop setting signal->group_exit_task signal: Remove SIGNAL_GROUP_COREDUMP signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process signal: Make coredump handling explicit in complete_signal signal: Have prepare_signal detect coredumps using signal->core_state signal: Have the oom killer detect coredumps using signal->core_state exit: Move force_uaccess back into do_exit exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit ...
| * exit: Rename module_put_and_exit to module_put_and_kthread_exitEric W. Biederman2021-12-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | Update module_put_and_exit to call kthread_exit instead of do_exit. Change the name to reflect this change in functionality. All of the users of module_put_and_exit are causing the current kthread to exit so this change makes it clear what is happening. There is no functional change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* | Merge tag 'tpmdd-next-v5.17-fixed' of ↵Linus Torvalds2022-01-115-35/+96
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull TPM updates from Jarkko Sakkinen: "Other than bug fixes for TPM, this includes a patch for asymmetric keys to allow to look up and verify with self-signed certificates (keys without so called AKID - Authority Key Identifier) using a new "dn:" prefix in the query" * tag 'tpmdd-next-v5.17-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: lib: remove redundant assignment to variable ret tpm: fix NPE on probe for missing device tpm: fix potential NULL pointer access in tpm_del_char_device tpm: Add Upgrade/Reduced mode support for TPM2 modules char: tpm: cr50: Set TPM_FIRMWARE_POWER_MANAGED based on device property keys: X.509 public key issuer lookup without AKID tpm_tis: Fix an error handling path in 'tpm_tis_core_init()' tpm: tpm_tis_spi_cr50: Add default RNG quality tpm/st33zp24: drop unneeded over-commenting tpm: add request_locality before write TPM_INT_ENABLE
| * | keys: X.509 public key issuer lookup without AKIDAndrew Zaborowski2022-01-095-35/+96
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are non-root X.509 v3 certificates in use out there that contain no Authority Key Identifier extension (RFC5280 section 4.2.1.1). For trust verification purposes the kernel asymmetric key type keeps two struct asymmetric_key_id instances that the key can be looked up by, and another two to look up the key's issuer. The x509 public key type and the PKCS7 type generate them from the SKID and AKID extensions in the certificate. In effect current code has no way to look up the issuer certificate for verification without the AKID. To remedy this, add a third asymmetric_key_id blob to the arrays in both asymmetric_key_id's (for certficate subject) and in the public_keys_signature's auth_ids (for issuer lookup), using just raw subject and issuer DNs from the certificate. Adapt asymmetric_key_ids() and its callers to use the third ID for lookups when none of the other two are available. Attempt to keep the logic intact when they are, to minimise behaviour changes. Adapt the restrict functions' NULL-checks to include that ID too. Do not modify the lookup logic in pkcs7_verify.c, the AKID extensions are still required there. Internally use a new "dn:" prefix to the search specifier string generated for the key lookup in find_asymmetric_key(). This tells asymmetric_key_match_preparse to only match the data against the raw DN in the third ID and shouldn't conflict with search specifiers already in use. In effect implement what (2) in the struct asymmetric_key_id comment (include/keys/asymmetric-type.h) is probably talking about already, so do not modify that comment. It is also how "openssl verify" looks up issuer certificates without the AKID available. Lookups by the raw DN are unambiguous only provided that the CAs respect the condition in RFC5280 4.2.1.1 that the AKID may only be omitted if the CA uses a single signing key. The following is an example of two things that this change enables. A self-signed ceritficate is generated following the example from https://letsencrypt.org/docs/certificates-for-localhost/, and can be looked up by an identifier and verified against itself by linking to a restricted keyring -- both things not possible before due to the missing AKID extension: $ openssl req -x509 -out localhost.crt -outform DER -keyout localhost.key \ -newkey rsa:2048 -nodes -sha256 \ -subj '/CN=localhost' -extensions EXT -config <( \ echo -e "[dn]\nCN=localhost\n[req]\ndistinguished_name = dn\n[EXT]\n" \ "subjectAltName=DNS:localhost\nkeyUsage=digitalSignature\n" \ "extendedKeyUsage=serverAuth") $ keyring=`keyctl newring test @u` $ trusted=`keyctl padd asymmetric trusted $keyring < localhost.crt`; \ echo $trusted 39726322 $ keyctl search $keyring asymmetric dn:3112301006035504030c096c6f63616c686f7374 39726322 $ keyctl restrict_keyring $keyring asymmetric key_or_keyring:$trusted $ keyctl padd asymmetric verified $keyring < localhost.crt Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
* | Merge branch 'linus' of ↵Linus Torvalds2022-01-1113-118/+280
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Algorithms: - Drop alignment requirement for data in aesni - Use synchronous seeding from the /dev/random in DRBG - Reseed nopr DRBGs every 5 minutes from /dev/random - Add KDF algorithms currently used by security/DH - Fix lack of entropy on some AMD CPUs with jitter RNG Drivers: - Add support for the D1 variant in sun8i-ce - Add SEV_INIT_EX support in ccp - PFVF support for GEN4 host driver in qat - Compression support for GEN4 devices in qat - Add cn10k random number generator support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (145 commits) crypto: af_alg - rewrite NULL pointer check lib/mpi: Add the return value check of kcalloc() crypto: qat - fix definition of ring reset results crypto: hisilicon - cleanup warning in qm_get_qos_value() crypto: kdf - select SHA-256 required for self-test crypto: x86/aesni - don't require alignment of data crypto: ccp - remove unneeded semicolon crypto: stm32/crc32 - Fix kernel BUG triggered in probe() crypto: s390/sha512 - Use macros instead of direct IV numbers crypto: sparc/sha - remove duplicate hash init function crypto: powerpc/sha - remove duplicate hash init function crypto: mips/sha - remove duplicate hash init function crypto: sha256 - remove duplicate generic hash init function crypto: jitter - add oversampling of noise source MAINTAINERS: update SEC2 driver maintainers list crypto: ux500 - Use platform_get_irq() to get the interrupt crypto: hisilicon/qm - disable qm clock-gating crypto: omap-aes - Fix broken pm_runtime_and_get() usage MAINTAINERS: update caam crypto driver maintainers list crypto: octeontx2 - prevent underflow in get_cores_bmap() ...
| * | crypto: af_alg - rewrite NULL pointer checkJiasheng Jiang2022-01-071-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because of the possible alloc failure of the alloc_page(), it could return NULL pointer. And there is a check below the sg_assign_page(). But it will be more logical to move the NULL check before the sg_assign_page(). Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: kdf - select SHA-256 required for self-testStephan Müller2021-12-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The self test of the KDF is based on SHA-256. Thus, this algorithm must be present as otherwise a warning is issued. Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: sha256 - remove duplicate generic hash init functionTianjia Zhang2021-12-311-14/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | crypto_sha256_init() and sha256_base_init() are the same repeated implementations, remove the crypto_sha256_init() in generic implementation, sha224 is the same process. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: jitter - add oversampling of noise sourceStephan Müller2021-12-311-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The output n bits can receive more than n bits of min entropy, of course, but the fixed output of the conditioning function can only asymptotically approach the output size bits of min entropy, not attain that bound. Random maps will tend to have output collisions, which reduces the creditable output entropy (that is what SP 800-90B Section 3.1.5.1.2 attempts to bound). The value "64" is justified in Appendix A.4 of the current 90C draft, and aligns with NIST's in "epsilon" definition in this document, which is that a string can be considered "full entropy" if you can bound the min entropy in each bit of output to at least 1-epsilon, where epsilon is required to be <= 2^(-32). Note, this patch causes the Jitter RNG to cut its performance in half in FIPS mode because the conditioning function of the LFSR produces 64 bits of entropy in one block. The oversampling requires that additionally 64 bits of entropy are sampled from the noise source. If the conditioner is changed, such as using SHA-256, the impact of the oversampling is only one fourth, because for the 256 bit block of the conditioner, only 64 additional bits from the noise source must be sampled. This patch is derived from the user space jitterentropy-library. Signed-off-by: Stephan Mueller <smueller@chronox.de> Reviewed-by: Simo Sorce <simo@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: jitter - quit sample collection loop upon RCT failureNicolai Stange2021-12-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The jitterentropy collection loop in jent_gen_entropy() can in principle run indefinitely without making any progress if it only receives stuck measurements as determined by jent_stuck(). After 31 consecutive stuck samples, the Repetition Count Test (RCT) would fail anyway and the jitterentropy RNG instances moved into ->health_failure == 1 state. jent_gen_entropy()'s caller, jent_read_entropy() would then check for this ->health_failure condition and return an error if found set. It follows that there's absolutely no point in continuing the collection loop in jent_gen_entropy() once the RCT has failed. Make the jitterentropy collection loop more robust by terminating it upon jent_health_failure() so that it won't continue to run indefinitely without making any progress. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: jitter - don't limit ->health_failure check to FIPS modeNicolai Stange2021-12-113-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The jitterentropy's Repetition Count Test (RCT) as well as the Adaptive Proportion Test (APT) are run unconditionally on any collected samples. However, their result, i.e. ->health_failure, will only get checked if fips_enabled is set, c.f. the jent_health_failure() wrapper. I would argue that a RCT or APT failure indicates that something's seriously off and that this should always be reported as an error, independently of whether FIPS mode is enabled or not: it should be up to callers whether or not and how to handle jitterentropy failures. Make jent_health_failure() to unconditionally return ->health_failure, independent of whether fips_enabled is set. Note that fips_enabled isn't accessed from the jitterentropy code anymore now. Remove the linux/fips.h include as well as the jent_fips_enabled() wrapper. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: drbg - ignore jitterentropy errors if not in FIPS modeNicolai Stange2021-12-111-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A subsequent patch will make the jitterentropy RNG to unconditionally report health test errors back to callers, independent of whether fips_enabled is set or not. The DRBG needs access to a functional jitterentropy instance only in FIPS mode (because it's the only SP800-90B compliant entropy source as it currently stands). Thus, it is perfectly fine for the DRBGs to obtain entropy from the jitterentropy source only on a best effort basis if fips_enabled is off. Make the DRBGs to ignore jitterentropy failures if fips_enabled is not set. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: dh - remove duplicate includesGuo Zhengkui2021-12-111-1/+0
| | | | | | | | | | | | | | | | | | | | | Remove a duplicate #include <linux/fips.h>. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: des - disallow des3 in FIPS modeStephan Müller2021-11-261-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Dec 31 2023 NIST sunsets TDES for FIPS use. To prevent FIPS validations to be completed in the future to be affected by the TDES sunsetting, disallow TDES already now. Otherwise a FIPS validation would need to be "touched again" end 2023 to handle TDES accordingly. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: dh - limit key size to 2048 in FIPS modeStephan Müller2021-11-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | FIPS disallows DH with keys < 2048 bits. Thus, the kernel should consider the enforcement of this limit. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: rsa - limit key size to 2048 in FIPS modeStephan Müller2021-11-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | FIPS disallows RSA with keys < 2048 bits. Thus, the kernel should consider the enforcement of this limit. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: jitter - consider 32 LSB for APTStephan Müller2021-11-261-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The APT compares the current time stamp with a pre-set value. The current code only considered the 4 LSB only. Yet, after reviews by mathematicians of the user space Jitter RNG version >= 3.1.0, it was concluded that the APT can be calculated on the 32 LSB of the time delta. Thi change is applied to the kernel. This fixes a bug where an AMD EPYC fails this test as its RDTSC value contains zeros in the LSB. The most appropriate fix would have been to apply a GCD calculation and divide the time stamp by the GCD. Yet, this is a significant code change that will be considered for a future update. Note, tests showed that constantly the GCD always was 32 on these systems, i.e. the 5 LSB were always zero (thus failing the APT since it only considered the 4 LSB for its calculation). Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: kdf - add SP800-108 counter key derivation functionStephan Müller2021-11-263-0/+162
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SP800-108 defines three KDFs - this patch provides the counter KDF implementation. The KDF is implemented as a service function where the caller has to maintain the hash / HMAC state. Apart from this hash/HMAC state, no additional state is required to be maintained by either the caller or the KDF implementation. The key for the KDF is set with the crypto_kdf108_setkey function which is intended to be invoked before the caller requests a key derivation operation via crypto_kdf108_ctr_generate. SP800-108 allows the use of either a HMAC or a hash as crypto primitive for the KDF. When a HMAC primtive is intended to be used, crypto_kdf108_setkey must be used to set the HMAC key. Otherwise, for a hash crypto primitve crypto_kdf108_ctr_generate can be used immediately after allocating the hash handle. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: drbg - reseed 'nopr' drbgs periodically from get_random_bytes()Nicolai Stange2021-11-261-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In contrast to the fully prediction resistant 'pr' DRBGs, the 'nopr' variants get seeded once at boot and reseeded only rarely thereafter, namely only after 2^20 requests have been served each. AFAICT, this reseeding based on the number of requests served is primarily motivated by information theoretic considerations, c.f. NIST SP800-90Ar1, sec. 8.6.8 ("Reseeding"). However, given the relatively large seed lifetime of 2^20 requests, the 'nopr' DRBGs can hardly be considered to provide any prediction resistance whatsoever, i.e. to protect against threats like side channel leaks of the internal DRBG state (think e.g. leaked VM snapshots). This is expected and completely in line with the 'nopr' naming, but as e.g. the "drbg_nopr_hmac_sha512" implementation is potentially being used for providing the "stdrng" and thus, the crypto_default_rng serving the in-kernel crypto, it would certainly be desirable to achieve at least the same level of prediction resistance as get_random_bytes() does. Note that the chacha20 rngs underlying get_random_bytes() get reseeded every CRNG_RESEED_INTERVAL == 5min: the secondary, per-NUMA node rngs from the primary one and the primary rng in turn from the entropy pool, provided sufficient entropy is available. The 'nopr' DRBGs do draw randomness from get_random_bytes() for their initial seed already, so making them to reseed themselves periodically from get_random_bytes() in order to let them benefit from the latter's prediction resistance is not such a big change conceptually. In principle, it would have been also possible to make the 'nopr' DRBGs to periodically invoke a full reseeding operation, i.e. to also consider the jitterentropy source (if enabled) in addition to get_random_bytes() for the seed value. However, get_random_bytes() is relatively lightweight as compared to the jitterentropy generation process and thus, even though the 'nopr' reseeding is supposed to get invoked infrequently, it's IMO still worthwhile to avoid occasional latency spikes for drbg_generate() and stick to get_random_bytes() only. As an additional remark, note that drawing randomness from the non-SP800-90B-conforming get_random_bytes() only won't adversely affect SP800-90A conformance either: the very same is being done during boot via drbg_seed_from_random() already once rng_is_initialized() flips to true and it follows that if the DRBG implementation does conform to SP800-90A now, it will continue to do so. Make the 'nopr' DRBGs to reseed themselves periodically from get_random_bytes() every CRNG_RESEED_INTERVAL == 5min. More specifically, introduce a new member ->last_seed_time to struct drbg_state for recording in units of jiffies when the last seeding operation had taken place. Make __drbg_seed() maintain it and let drbg_generate() invoke a reseed from get_random_bytes() via drbg_seed_from_random() if more than 5min have passed by since the last seeding operation. Be careful to not to reseed if in testing mode though, or otherwise the drbg related tests in crypto/testmgr.c would fail to reproduce the expected output. In order to keep the formatting clean in drbg_generate() wrap the logic for deciding whether or not a reseed is due in a new helper, drbg_nopr_reseed_interval_elapsed(). Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: drbg - make drbg_prepare_hrng() handle jent instantiation errorsNicolai Stange2021-11-261-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that drbg_prepare_hrng() doesn't do anything but to instantiate a jitterentropy crypto_rng instance, it looks a little odd to have the related error handling at its only caller, drbg_instantiate(). Move the handling of jitterentropy allocation failures from drbg_instantiate() close to the allocation itself in drbg_prepare_hrng(). There is no change in behaviour. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: drbg - make reseeding from get_random_bytes() synchronousNicolai Stange2021-11-261-51/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | get_random_bytes() usually hasn't full entropy available by the time DRBG instances are first getting seeded from it during boot. Thus, the DRBG implementation registers random_ready_callbacks which would in turn schedule some work for reseeding the DRBGs once get_random_bytes() has sufficient entropy available. For reference, the relevant history around handling DRBG (re)seeding in the context of a not yet fully seeded get_random_bytes() is: commit 16b369a91d0d ("random: Blocking API for accessing nonblocking_pool") commit a73db989e365 ("crypto: drbg - add async seeding operation") commit 205a525c3342 ("random: Add callback API for random pool readiness") commit 023b75dd47bc ("crypto: drbg - Use callback API for random readiness") commit c2719503f5e1 ("random: Remove kernel blocking API") However, some time later, the initialization state of get_random_bytes() has been made queryable via rng_is_initialized() introduced with commit 9a47249d444d ("random: Make crng state queryable"). This primitive now allows for streamlining the DRBG reseeding from get_random_bytes() by replacing that aforementioned asynchronous work scheduling from random_ready_callbacks with some simpler, synchronous code in drbg_generate() next to the related logic already present therein. Apart from improving overall code readability, this change will also enable DRBG users to rely on wait_for_random_bytes() for ensuring that the initial seeding has completed, if desired. The previous patches already laid the grounds by making drbg_seed() to record at each DRBG instance whether it was being seeded at a time when rng_is_initialized() still had been false as indicated by ->seeded == DRBG_SEED_STATE_PARTIAL. All that remains to be done now is to make drbg_generate() check for this condition, determine whether rng_is_initialized() has flipped to true in the meanwhile and invoke a reseed from get_random_bytes() if so. Make this move: - rename the former drbg_async_seed() work handler, i.e. the one in charge of reseeding a DRBG instance from get_random_bytes(), to "drbg_seed_from_random()", - change its signature as appropriate, i.e. make it take a struct drbg_state rather than a work_struct and change its return type from "void" to "int" in order to allow for passing error information from e.g. its __drbg_seed() invocation onwards to callers, - make drbg_generate() invoke this drbg_seed_from_random() once it encounters a DRBG instance with ->seeded == DRBG_SEED_STATE_PARTIAL by the time rng_is_initialized() has flipped to true and - prune everything related to the former, random_ready_callback based mechanism. As drbg_seed_from_random() is now getting invoked from drbg_generate() with the ->drbg_mutex being held, it must not attempt to recursively grab it once again. Remove the corresponding mutex operations from what is now drbg_seed_from_random(). Furthermore, as drbg_seed_from_random() can now report errors directly to its caller, there's no need for it to temporarily switch the DRBG's ->seeded state to DRBG_SEED_STATE_UNSEEDED so that a failure of the subsequently invoked __drbg_seed() will get signaled to drbg_generate(). Don't do it then. Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: drbg - move dynamic ->reseed_threshold adjustments to __drbg_seed()Nicolai Stange2021-11-261-9/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit d2a5f0e4f727 ("crypto: drbg - reseed often if seedsource is degraded"), the maximum seed lifetime represented by ->reseed_threshold gets temporarily lowered if the get_random_bytes() source cannot provide sufficient entropy yet, as is common during boot, and restored back to the original value again once that has changed. More specifically, if the add_random_ready_callback() invoked from drbg_prepare_hrng() in the course of DRBG instantiation does not return -EALREADY, that is, if get_random_bytes() has not been fully initialized at this point yet, drbg_prepare_hrng() will lower ->reseed_threshold to a value of 50. The drbg_async_seed() scheduled from said random_ready_callback will eventually restore the original value. A future patch will replace the random_ready_callback based notification mechanism and thus, there will be no add_random_ready_callback() return value anymore which could get compared to -EALREADY. However, there's __drbg_seed() which gets invoked in the course of both, the DRBG instantiation as well as the eventual reseeding from get_random_bytes() in aforementioned drbg_async_seed(), if any. Moreover, it knows about the get_random_bytes() initialization state by the time the seed data had been obtained from it: the new_seed_state argument introduced with the previous patch would get set to DRBG_SEED_STATE_PARTIAL in case get_random_bytes() had not been fully initialized yet and to DRBG_SEED_STATE_FULL otherwise. Thus, __drbg_seed() provides a convenient alternative for managing that ->reseed_threshold lowering and restoring at a central place. Move all ->reseed_threshold adjustment code from drbg_prepare_hrng() and drbg_async_seed() respectively to __drbg_seed(). Make __drbg_seed() lower the ->reseed_threshold to 50 in case its new_seed_state argument equals DRBG_SEED_STATE_PARTIAL and let it restore the original value otherwise. There is no change in behaviour. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: drbg - track whether DRBG was seeded with !rng_is_initialized()Nicolai Stange2021-11-261-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the DRBG implementation schedules asynchronous works from random_ready_callbacks for reseeding the DRBG instances with output from get_random_bytes() once the latter has sufficient entropy available. However, as the get_random_bytes() initialization state can get queried by means of rng_is_initialized() now, there is no real need for this asynchronous reseeding logic anymore and it's better to keep things simple by doing it synchronously when needed instead, i.e. from drbg_generate() once rng_is_initialized() has flipped to true. Of course, for this to work, drbg_generate() would need some means by which it can tell whether or not rng_is_initialized() has flipped to true since the last seeding from get_random_bytes(). Or equivalently, whether or not the last seed from get_random_bytes() has happened when rng_is_initialized() was still evaluating to false. As it currently stands, enum drbg_seed_state allows for the representation of two different DRBG seeding states: DRBG_SEED_STATE_UNSEEDED and DRBG_SEED_STATE_FULL. The former makes drbg_generate() to invoke a full reseeding operation involving both, the rather expensive jitterentropy as well as the get_random_bytes() randomness sources. The DRBG_SEED_STATE_FULL state on the other hand implies that no reseeding at all is required for a !->pr DRBG variant. Introduce the new DRBG_SEED_STATE_PARTIAL state to enum drbg_seed_state for representing the condition that a DRBG was being seeded when rng_is_initialized() had still been false. In particular, this new state implies that - the given DRBG instance has been fully seeded from the jitterentropy source (if enabled) - and drbg_generate() is supposed to reseed from get_random_bytes() *only* once rng_is_initialized() turns to true. Up to now, the __drbg_seed() helper used to set the given DRBG instance's ->seeded state to constant DRBG_SEED_STATE_FULL. Introduce a new argument allowing for the specification of the to be written ->seeded value instead. Make the first of its two callers, drbg_seed(), determine the appropriate value based on rng_is_initialized(). The remaining caller, drbg_async_seed(), is known to get invoked only once rng_is_initialized() is true, hence let it pass constant DRBG_SEED_STATE_FULL for the new argument to __drbg_seed(). There is no change in behaviour, except for that the pr_devel() in drbg_generate() would now report "unseeded" for ->pr DRBG instances which had last been seeded when rng_is_initialized() was still evaluating to false. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: drbg - prepare for more fine-grained tracking of seeding stateNicolai Stange2021-11-261-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two different randomness sources the DRBGs are getting seeded from, namely the jitterentropy source (if enabled) and get_random_bytes(). At initial DRBG seeding time during boot, the latter might not have collected sufficient entropy for seeding itself yet and thus, the DRBG implementation schedules a reseed work from a random_ready_callback once that has happened. This is particularly important for the !->pr DRBG instances, for which (almost) no further reseeds are getting triggered during their lifetime. Because collecting data from the jitterentropy source is a rather expensive operation, the aforementioned asynchronously scheduled reseed work restricts itself to get_random_bytes() only. That is, it in some sense amends the initial DRBG seed derived from jitterentropy output at full (estimated) entropy with fresh randomness obtained from get_random_bytes() once that has been seeded with sufficient entropy itself. With the advent of rng_is_initialized(), there is no real need for doing the reseed operation from an asynchronously scheduled work anymore and a subsequent patch will make it synchronous by moving it next to related logic already present in drbg_generate(). However, for tracking whether a full reseed including the jitterentropy source is required or a "partial" reseed involving only get_random_bytes() would be sufficient already, the boolean struct drbg_state's ->seeded member must become a tristate value. Prepare for this by introducing the new enum drbg_seed_state and change struct drbg_state's ->seeded member's type from bool to that type. For facilitating review, enum drbg_seed_state is made to only contain two members corresponding to the former ->seeded values of false and true resp. at this point: DRBG_SEED_STATE_UNSEEDED and DRBG_SEED_STATE_FULL. A third one for tracking the intermediate state of "seeded from jitterentropy only" will be introduced with a subsequent patch. There is no change in behaviour at this point. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: testmgr - Fix wrong test case of RSALei He2021-11-201-3/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the BER encoding rules, integer value should be encoded as two's complement, and if the highest bit of a positive integer is 1, should add a leading zero-octet. The kernel's built-in RSA algorithm cannot recognize negative numbers when parsing keys, so it can pass this test case. Export the key to file and run the following command to verify the fix result: openssl asn1parse -inform DER -in /path/to/key/file Signed-off-by: Lei He <helei.sig11@bytedance.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2022-01-100-0/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "Highlights are support for privacy screens found in new laptops, a bunch of nomodeset refactoring, and i915 enables ADL-P systems by default, while starting to add RPL-S support. vmwgfx adds GEM and support for OpenGL 4.3 features in userspace. Lots of internal refactorings around dma reservations, and lots of driver refactoring as well. Summary: core: - add privacy screen support - move nomodeset option into drm subsystem - clean up nomodeset handling in drivers - make drm_irq.c legacy - fix stack_depot name conflicts - remove DMA_BUF_SET_NAME ioctl restrictions - sysfs: send hotplug event - replace several DRM_* logging macros with drm_* - move hashtable to legacy code - add error return from gem_create_object - cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER - kernel.h related include cleanups - support XRGB2101010 source buffers ttm: - don't include drm hashtable - stop pruning fences after wait - documentation updates dma-buf: - add dma_resv selftest - add debugfs helpers - remove dma_resv_get_excl_unlocked - documentation - make fences mandatory in dma_resv_add_excl_fence dp: - add link training delay helpers gem: - link shmem/cma helpers into separate modules - use dma_resv iteratior - import dma-buf namespace into gem helper modules scheduler: - fence grab fix - lockdep fixes bridge: - switch to managed MIPI DSI helpers - register and attach during probe fixes - convert to YAML in several places. panel: - add bunch of new panesl simpledrm: - support FB_DAMAGE_CLIPS - support virtual screen sizes - add Apple M1 support amdgpu: - enable seamless boot for DCN 3.01 - runtime PM fixes - use drm_kms_helper_connector_hotplug_event - get all fences at once - use generic drm fb helpers - PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes - add smart trace buffer (STB) for supported GPUs - display debugfs entries - new SMU debug option - Documentation update amdkfd: - IP discovery enumeration refactor - interface between driver fixes - SVM fixes - kfd uapi header to define some sysfs bitfields. i915: - support VESA panel backlights - enable ADL-P by default - add eDP privacy screen support - add Raptor Lake S (RPL-S) support - DG2 page table support - lots of GuC/HuC fw refactoring - refactored i915->gt interfaces - CD clock squashing support - enable 10-bit gamma support - update ADL-P DMC fw to v2.14 - enable runtime PM autosuspend by default - ADL-P DSI support - per-lane DP drive settings for ICL+ - add support for pipe C/D DMC firmware - Atomic gamma LUT updates - remove CCS FB stride restrictions on ADL-P - VRR platform support for display 11 - add support for display audio codec keepalive - lots of display refactoring - fix runtime PM handling during PXP suspend - improved eviction performance with async TTM moves - async VMA unbinding improvements - VMA locking refactoring - improved error capture robustness - use per device iommu checks - drop bits stealing from i915_sw_fence function ptr - remove dma_resv_prune - add IC cache invalidation on DG2 nouveau: - crc fixes - validate LUTs in atomic check - set HDMI AVI RGB quant to full tegra: - buffer objects reworks for dma-buf compat - NVDEC driver uAPI support - power management improvements etnaviv: - IOMMU enabled system support - fix > 4GB command buffer mapping - close a DoS vector - fix spurious GPU resets ast: - fix i2c initialization rcar-du: - DSI output support exynos: - replace legacy gpio interface - implement generic GEM object mmap msm: - dpu plane state cleanup in prep for multirect - dpu debugfs cleanups - dp support for sc7280 - a506 support - removal of struct_mutex - remove old eDP sub-driver anx7625: - support MIPI DSI input - support HDMI audio - fix reading EDID lvds: - fix bridge DT bindings megachips: - probe both bridges before registering dw-hdmi: - allow interlace on bridge ps8640: - enable runtime PM - support aux-bus tx358768: - enable reference clock - add pulse mode support ti-sn65dsi86: - use regmap bulk write - add PWM support etnaviv: - get all fences at once gma500: - gem object cleanups kmb: - enable fb console radeon: - use dma_resv_wait_timeout rockchip: - add DSP hold timeout - suspend/resume fixes - PLL clock fixes - implement mmap in GEM object functions - use generic fbdev emulation sun4i: - use CMA helpers without vmap support vc4: - fix HDMI-CEC hang with display is off - power on HDMI controller while disabling - support 4K@60Hz modes - support 10-bit YUV 4:2:0 output vmwgfx: - fix leak on probe errors - fail probing on broken hosts - new placement for MOB page tables - hide internal BOs from userspace - implement GEM support - implement GL 4.3 support virtio: - overflow fixes xen: - implement mmap as GEM object function omapdrm: - fix scatterlist export - support virtual planes mediatek: - MT8192 support - CMDQ refinement" * tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits) drm/amdgpu: no DC support for headless chips drm/amd/display: fix dereference before NULL check drm/amdgpu: always reset the asic in suspend (v2) drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform drm/amd/display: Fix the uninitialized variable in enable_stream_features() drm/amdgpu: fix runpm documentation amdgpu/pm: Make sysfs pm attributes as read-only for VFs drm/amdgpu: save error count in RAS poison handler drm/amdgpu: drop redundant semicolon drm/amd/display: get and restore link res map drm/amd/display: support dynamic HPO DP link encoder allocation drm/amd/display: access hpo dp link encoder only through link resource drm/amd/display: populate link res in both detection and validation drm/amd/display: define link res and make it accessible to all link interfaces drm/amd/display: 3.2.167 drm/amd/display: [FW Promotion] Release 0.0.98 drm/amd/display: Undo ODM combine drm/amd/display: Add reg defs for DCN303 drm/amd/display: Changed pipe split policy to allow for multi-display pipe split drm/amd/display: Set optimize_pwr_state for DCN31 ...
| * | Merge drm/drm-next into drm-misc-next-fixesThomas Zimmermann2021-12-1720-337/+224
| |\| | | | | | | | | | | | | | | | | | | Backmerging to bring drm-misc-next-fixes up to the latest state for the current release cycle. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
* | | lib/crypto: blake2s: include as built-inJason A. Donenfeld2022-01-071-1/+2
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for using blake2s in the RNG, we change the way that it is wired-in to the build system. Instead of using ifdefs to select the right symbol, we use weak symbols. And because ARM doesn't need the generic implementation, we make the generic one default only if an arch library doesn't need it already, and then have arch libraries that do need it opt-in. So that the arch libraries can remain tristate rather than bool, we then split the shash part from the glue code. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: linux-kbuild@vger.kernel.org Cc: linux-crypto@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 08:53:11 +0000