summaryrefslogtreecommitdiff
path: root/crypto (follow)
Commit message (Collapse)AuthorAgeFilesLines
* crypto: poly1305 - expose init/update/final library interfaceArd Biesheuvel2019-11-171-21/+1
| | | | | | | | | | | Expose the existing generic Poly1305 code via a init/update/final library interface so that callers are not required to go through the crypto API's shash abstraction to access it. At the same time, make some preparations so that the library implementation can be superseded by an accelerated arch-specific version in the future. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: x86/poly1305 - unify Poly1305 state struct with generic codeArd Biesheuvel2019-11-171-3/+3
| | | | | | | | | | In preparation of exposing a Poly1305 library interface directly from the accelerated x86 driver, align the state descriptor of the x86 code with the one used by the generic driver. This is needed to make the library interface unified between all implementations. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: poly1305 - move core routines into a separate libraryArd Biesheuvel2019-11-174-192/+16
| | | | | | | | | | | | | | Move the core Poly1305 routines shared between the generic Poly1305 shash driver and the Adiantum and NHPoly1305 drivers into a separate library so that using just this pieces does not pull in the crypto API pieces of the generic Poly1305 routine. In a subsequent patch, we will augment this generic library with init/update/final routines so that Poyl1305 algorithm can be used directly without the need for using the crypto API's shash abstraction. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: chacha - unexport chacha_generic routinesArd Biesheuvel2019-11-171-18/+8
| | | | | | | | | | Now that all users of generic ChaCha code have moved to the core library, there is no longer a need for the generic ChaCha skcpiher driver to export parts of it implementation for reuse by other drivers. So drop the exports, and make the symbols static. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: mips/chacha - wire up accelerated 32r2 code from ZincArd Biesheuvel2019-11-171-0/+6
| | | | | | | | | | | | | | | | | | | This integrates the accelerated MIPS 32r2 implementation of ChaCha into both the API and library interfaces of the kernel crypto stack. The significance of this is that, in addition to becoming available as an accelerated library implementation, it can also be used by existing crypto API code such as Adiantum (for block encryption on ultra low performance cores) or IPsec using chacha20poly1305. These are use cases that have already opted into using the abstract crypto API. In order to support Adiantum, the core assembler routine has been adapted to take the round count as a function argument rather than hardcoding it to 20. Co-developed-by: René van Dorst <opensource@vdorst.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: x86/chacha - expose SIMD ChaCha routine as library functionArd Biesheuvel2019-11-171-0/+1
| | | | | | | | | | | | | | | Wire the existing x86 SIMD ChaCha code into the new ChaCha library interface, so that users of the library interface will get the accelerated version when available. Given that calls into the library API will always go through the routines in this module if it is enabled, switch to static keys to select the optimal implementation available (which may be none at all, in which case we defer to the generic implementation for all invocations). Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: x86/chacha - depend on generic chacha library instead of crypto driverArd Biesheuvel2019-11-171-1/+1
| | | | | | | | | | | | | | | | In preparation of extending the x86 ChaCha driver to also expose the ChaCha library interface, drop the dependency on the chacha_generic crypto driver as a non-SIMD fallback, and depend on the generic ChaCha library directly. This way, we only pull in the code we actually need, without registering a set of ChaCha skciphers that we will never use. Since turning the FPU on and off is cheap these days, simplify the SIMD routine by dropping the per-page yield, which makes for a cleaner switch to the library API as well. This also allows use to invoke the skcipher walk routines in non-atomic mode. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: chacha - move existing library code into lib/cryptoArd Biesheuvel2019-11-172-55/+6
| | | | | | | | | | | | | | | | | | | | Currently, our generic ChaCha implementation consists of a permute function in lib/chacha.c that operates on the 64-byte ChaCha state directly [and which is always included into the core kernel since it is used by the /dev/random driver], and the crypto API plumbing to expose it as a skcipher. In order to support in-kernel users that need the ChaCha streamcipher but have no need [or tolerance] for going through the abstractions of the crypto API, let's expose the streamcipher bits via a library API as well, in a way that permits the implementation to be superseded by an architecture specific one if provided. So move the streamcipher code into a separate module in lib/crypto, and expose the init() and crypt() routines to users of the library. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: lib - tidy up lib/crypto Kconfig and MakefileArd Biesheuvel2019-11-171-12/+1
| | | | | | | | In preparation of introducing a set of crypto library interfaces, tidy up the Makefile and split off the Kconfig symbols into a separate file. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: aead - Split out geniv into its own moduleHerbert Xu2019-11-173-163/+179
| | | | | | | | | | | | | If aead is built as a module along with cryptomgr, it creates a dependency loop due to the dependency chain aead => crypto_null => cryptomgr => aead. This is due to the presence of the AEAD geniv code. This code is not really part of the AEAD API but simply support code for IV generators such as seqiv. This patch moves the geniv code into its own module thus breaking the dependency loop. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: api - Add softdep on cryptomgrHerbert Xu2019-11-171-0/+1
| | | | | | | | | | | | The crypto API requires cryptomgr to be present for probing to work so we need a softdep to ensure that cryptomgr is added to the initramfs. This was usually not a problem because until very recently it was not practical to build crypto API as module but with the recent work to eliminate direct AES users this is now possible. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: tgr192 - remove unneeded semicolonTian Tao2019-11-151-2/+2
| | | | | | | | | | | Fix the warning below. ./crypto/tgr192.c:558:43-44: Unneeded semicolon ./crypto/tgr192.c:586:44-45: Unneeded semicolon Fixes: 476351ace0cb ("crypto: tgr192 - Switch to shash") Signed-off-by: Tian Tao <tiantao6@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: skcipher - rename the crypto_blkcipher module and kconfig optionEric Biggers2019-11-012-45/+45
| | | | | | | | | | | | Now that the blkcipher algorithm type has been removed in favor of skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher, and rename the config options accordingly: CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2 Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: skcipher - remove the "blkcipher" algorithm typeEric Biggers2019-11-017-664/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that all "blkcipher" algorithms have been converted to "skcipher", remove the blkcipher algorithm type. The skcipher (symmetric key cipher) algorithm type was introduced a few years ago to replace both blkcipher and ablkcipher (synchronous and asynchronous block cipher). The advantages of skcipher include: - A much less confusing name, since none of these algorithm types have ever actually been for raw block ciphers, but rather for all length-preserving encryption modes including block cipher modes of operation, stream ciphers, and other length-preserving modes. - It unified blkcipher and ablkcipher into a single algorithm type which supports both synchronous and asynchronous implementations. Note, blkcipher already operated only on scatterlists, so the fact that skcipher does too isn't a regression in functionality. - Better type safety by using struct skcipher_alg, struct crypto_skcipher, etc. instead of crypto_alg, crypto_tfm, etc. - It sometimes simplifies the implementations of algorithms. Also, the blkcipher API was no longer being tested. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: skcipher - rename crypto_skcipher_type2 to crypto_skcipher_typeEric Biggers2019-11-011-7/+6
| | | | | | | | | Now that the crypto_skcipher_type() function has been removed, there's no reason to call the crypto_type struct for skciphers "crypto_skcipher_type2". Rename it to simply "crypto_skcipher_type". Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: skcipher - unify the crypto_has_skcipher*() functionsEric Biggers2019-11-011-2/+2
| | | | | | | | | | | | | crypto_has_skcipher() and crypto_has_skcipher2() do the same thing: they check for the availability of an algorithm of type skcipher, blkcipher, or ablkcipher, which also meets any non-type constraints the caller specified. And they have exactly the same prototype. Therefore, eliminate the redundancy by removing crypto_has_skcipher() and renaming crypto_has_skcipher2() to crypto_has_skcipher(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: testmgr - add test vectors for blake2bDavid Sterba2019-11-012-0/+335
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Test vectors for blake2b with various digest sizes. As the algorithm is the same up to the digest calculation, the key and input data length is distributed in a way that tests all combinanions of the two over the digest sizes. Based on the suggestion from Eric, the following input sizes are tested [0, 1, 7, 15, 64, 247, 256], where blake2b blocksize is 128, so the padded and the non-padded input buffers are tested. blake2b-160 blake2b-256 blake2b-384 blake2b-512 --------------------------------------------------- len=0 | klen=0 klen=1 klen=32 klen=64 len=1 | klen=32 klen=64 klen=0 klen=1 len=7 | klen=64 klen=0 klen=1 klen=32 len=15 | klen=1 klen=32 klen=64 klen=0 len=64 | klen=0 klen=1 klen=32 klen=64 len=247 | klen=32 klen=64 klen=0 klen=1 len=256 | klen=64 klen=0 klen=1 klen=32 Where key: - klen=0: empty key - klen=1: 1 byte value 0x42, 'B' - klen=32: first 32 bytes of the default key, sequence 00..1f - klen=64: default key, sequence 00..3f The unkeyed vectors are ordered before keyed, as this is required by testmgr. CC: Eric Biggers <ebiggers@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: blake2b - add blake2b generic implementationDavid Sterba2019-11-013-0/+453
| | | | | | | | | | | | | | | | | | | | The patch brings support of several BLAKE2 variants (2b with various digest lengths). The keyed digest is supported, using tfm->setkey call. The in-tree user will be btrfs (for checksumming), we're going to use the BLAKE2b-256 variant. The code is reference implementation taken from the official sources and modified in terms of kernel coding style (whitespace, comments, uintXX_t -> uXX types, removed unused prototypes and #ifdefs, removed testing code, changed secure_zero_memory -> memzero_explicit, used own helpers for unaligned reads/writes and rotations). Further changes removed sanity checks of key length or output size, these values are verified in the crypto API callbacks or hardcoded in shash_alg and not exposed to users. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: ecdh - fix big endian bug in ECC libraryArd Biesheuvel2019-11-011-1/+2
| | | | | | | | | | | | | | | The elliptic curve arithmetic library used by the EC-DH KPP implementation assumes big endian byte order, and unconditionally reverses the byte and word order of multi-limb quantities. On big endian systems, the byte reordering is not necessary, while the word ordering needs to be retained. So replace the __swab64() invocation with a call to be64_to_cpu() which should do the right thing for both little and big endian builds. Fixes: e8c7f3061131 ("crypto: ecdh - Add ECDH software support") Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: powerpc - convert SPE AES algorithms to skcipher APIEric Biggers2019-10-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the glue code for the PowerPC SPE implementations of AES-ECB, AES-CBC, AES-CTR, and AES-XTS from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Tested with: export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- make mpc85xx_defconfig cat >> .config << EOF # CONFIG_MODULES is not set # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_DEBUG_KERNEL=y CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_AES_PPC_SPE=y EOF make olddefconfig make -j32 qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \ -kernel arch/powerpc/boot/zImage \ -append cryptomgr.fuzz_iterations=1000 Note that xts-ppc-spe still fails the comparison tests due to the lack of ciphertext stealing support. This is not addressed by this patch. This patch also cleans up the code by making ->encrypt() and ->decrypt() call a common function for each of ECB, CBC, and XTS, and by using a clearer way to compute the length to process at each step. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: aegis128 - duplicate init() and final() hooks in SIMD codeArd Biesheuvel2019-10-263-12/+97
| | | | | | | | | | In order to speed up aegis128 processing even more, duplicate the init() and final() routines as SIMD versions in their entirety. This results in a 2x speedup on ARM Cortex-A57 for ~1500 byte packets (using AES instructions). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: aegis128 - avoid function pointers for parameterizationArd Biesheuvel2019-10-261-59/+46
| | | | | | | | | | Instead of passing around an ops structure with function pointers, which forces indirect calls to be used, refactor the code slightly so we can use ordinary function calls. At the same time, switch to a static key to decide whether or not the SIMD code path may be used. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: sparc/des - convert to skcipher APIEric Biggers2019-10-231-0/+1
| | | | | | | | | | Convert the glue code for the SPARC64 DES opcodes implementations of DES-ECB, DES-CBC, 3DES-ECB, and 3DES-CBC from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: sparc/camellia - convert to skcipher APIEric Biggers2019-10-231-0/+1
| | | | | | | | | | Convert the glue code for the SPARC64 Camellia opcodes implementations of Camellia-ECB and Camellia-CBC from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: sparc/aes - convert to skcipher APIEric Biggers2019-10-231-2/+1
| | | | | | | | | | Convert the glue code for the SPARC64 AES opcodes implementations of AES-ECB, AES-CBC, and AES-CTR from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: jitter - add header to fix buildwarningsBen Dooks2019-10-183-13/+19
| | | | | | | | | | | | | | | | | | | | | Fix the following build warnings by adding a header for the definitions shared between jitterentropy.c and jitterentropy-kcapi.c. Fixes the following: crypto/jitterentropy.c:445:5: warning: symbol 'jent_read_entropy' was not declared. Should it be static? crypto/jitterentropy.c:475:18: warning: symbol 'jent_entropy_collector_alloc' was not declared. Should it be static? crypto/jitterentropy.c:509:6: warning: symbol 'jent_entropy_collector_free' was not declared. Should it be static? crypto/jitterentropy.c:516:5: warning: symbol 'jent_entropy_init' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:59:6: warning: symbol 'jent_zalloc' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:64:6: warning: symbol 'jent_zfree' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:69:5: warning: symbol 'jent_fips_enabled' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:74:6: warning: symbol 'jent_panic' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:79:6: warning: symbol 'jent_memcpy' was not declared. Should it be static? crypto/jitterentropy-kcapi.c:93:6: warning: symbol 'jent_get_nstime' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Stephan Mueller <smueller@chronox.de Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: user - fix memory leak in crypto_reportstatNavid Emamdoost2019-10-101-1/+3
| | | | | | | | | | | In crypto_reportstat, a new skb is created by nlmsg_new(). This skb is leaked if crypto_reportstat_alg() fails. Required release for skb is added. Fixes: 0115ab23b941 ("crypto: user - Implement a generic crypto statistics") Cc: <stable@vger.kernel.org> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: user - fix memory leak in crypto_reportNavid Emamdoost2019-10-101-1/+3
| | | | | | | | | | In crypto_report, a new skb is created via nlmsg_new(). This skb should be released if crypto_report_alg() fails. Fixes: 2da2418a8b84 ("crypto: Add userspace configuration API") Cc: <stable@vger.kernel.org> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: af_alg - cast ki_complete ternary op to intAyush Sawal2019-10-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | when libkcapi test is executed using HW accelerator, cipher operation return -74.Since af_alg_async_cb->ki_complete treat err as unsigned int, libkcapi receive 429467222 even though it expect -ve value. Hence its required to cast resultlen to int so that proper error is returned to libkcapi. AEAD one shot non-aligned test 2(libkcapi test) ./../bin/kcapi -x 10 -c "gcm(aes)" -i 7815d4b06ae50c9c56e87bd7 -k ea38ac0c9b9998c80e28fb496a2b88d9 -a "853f98a750098bec1aa7497e979e78098155c877879556bb51ddeb6374cbaefc" -t "c4ce58985b7203094be1d134c1b8ab0b" -q "b03692f86d1b8b39baf2abb255197c98" Fixes: 0c2a2d0aa6e4 ("crypto: algif_aead - overhaul memory management") Cc: <stable@vger.kernel.org> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: aegis128/simd - build 32-bit ARM for v8 architecture explicitlyArd Biesheuvel2019-10-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Now that the Clang compiler has taken it upon itself to police the compiler command line, and reject combinations for arguments it views as incompatible, the AEGIS128 no longer builds correctly, and errors out like this: clang-10: warning: ignoring extension 'crypto' because the 'armv7-a' architecture does not support it [-Winvalid-command-line-argument] So let's switch to armv8-a instead, which matches the crypto-neon-fp-armv8 FPU profile we specify. Since neither were actually supported by GCC versions before 4.8, let's tighten the Kconfig dependencies as well so we won't run into errors when building with an ancient compiler. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: <ci_notify@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: jitter - fix commentsAlexander E. Patrakov2019-10-051-3/+3
| | | | | | | | One should not say "ec can be NULL" and then dereference it. One cannot talk about the return value if the function returns void. Signed-off-by: Alexander E. Patrakov <patrakov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: aegis128-neon - use Clang compatible cflags for ARMArd Biesheuvel2019-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | The next version of Clang will start policing compiler command line options, and will reject combinations of -march and -mfpu that it thinks are incompatible. This results in errors like clang-10: warning: ignoring extension 'crypto' because the 'armv7-a' architecture does not support it [-Winvalid-command-line-argument] /tmp/aegis128-neon-inner-5ee428.s: Assembler messages: /tmp/aegis128-neon-inner-5ee428.s:73: Error: selected processor does not support `aese.8 q2,q14' in ARM mode when buiding the SIMD aegis128 code for 32-bit ARM, given that the 'armv7-a' -march argument is considered to be compatible with the ARM crypto extensions. Instead, we should use armv8-a, which does allow the crypto extensions to be enabled. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: testmgr - Added testvectors for the rfc3686(ctr(sm4)) skcipherPascal van Leeuwen2019-10-052-0/+35
| | | | | | | | | | Added testvectors for the rfc3686(ctr(sm4)) skcipher algorithm changes since v1: - nothing Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: testmgr - Added testvectors for the ofb(sm4) & cfb(sm4) skciphersPascal van Leeuwen2019-10-052-0/+110
| | | | | | | | | | Added testvectors for the ofb(sm4) and cfb(sm4) skcipher algorithms changes since v1: - nothing Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: testmgr - Added testvectors for the hmac(sm3) ahashPascal van Leeuwen2019-10-052-0/+62
| | | | | | | | | | Added testvectors for the hmac(sm3) ahash authentication algorithm changes since v1 & v2: -nothing Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: testmgr - add another gcm(aes) testcaseArd Biesheuvel2019-10-051-0/+192
| | | | | | | | | | Add an additional gcm(aes) test case that triggers the code path in the new arm64 driver that deals with tail blocks whose size is not a multiple of the block size, and where the size of the preceding input is a multiple of 64 bytes. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: algif_skcipher - Use chunksize instead of blocksizeHerbert Xu2019-10-051-1/+1
| | | | | | | | | | | | | | | | When algif_skcipher does a partial operation it always process data that is a multiple of blocksize. However, for algorithms such as CTR this is wrong because even though it can process any number of bytes overall, the partial block must come at the very end and not in the middle. This is exactly what chunksize is meant to describe so this patch changes blocksize to chunksize. Fixes: fcbb8a3beda3 ("crypto: algif_skcipher - User-space...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Merge branch 'next-lockdown' of ↵Linus Torvalds2019-09-281-1/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
| * kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCEJiri Bohac2019-08-191-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a preparatory patch for kexec_file_load() lockdown. A locked down kernel needs to prevent unsigned kernel images from being loaded with kexec_file_load(). Currently, the only way to force the signature verification is compiling with KEXEC_VERIFY_SIG. This prevents loading usigned images even when the kernel is not locked down at runtime. This patch splits KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE. Analogous to the MODULE_SIG and MODULE_SIG_FORCE for modules, KEXEC_SIG turns on the signature verification but allows unsigned images to be loaded. KEXEC_SIG_FORCE disallows images without a valid signature. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Garrett <mjg59@google.com> cc: kexec@lists.infradead.org Signed-off-by: James Morris <jmorris@namei.org>
* | Merge branch 'next-integrity' of ↵Linus Torvalds2019-09-271-0/+33
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "The major feature in this time is IMA support for measuring and appraising appended file signatures. In addition are a couple of bug fixes and code cleanup to use struct_size(). In addition to the PE/COFF and IMA xattr signatures, the kexec kernel image may be signed with an appended signature, using the same scripts/sign-file tool that is used to sign kernel modules. Similarly, the initramfs may contain an appended signature. This contained a lot of refactoring of the existing appended signature verification code, so that IMA could retain the existing framework of calculating the file hash once, storing it in the IMA measurement list and extending the TPM, verifying the file's integrity based on a file hash or signature (eg. xattrs), and adding an audit record containing the file hash, all based on policy. (The IMA support for appended signatures patch set was posted and reviewed 11 times.) The support for appended signature paves the way for adding other signature verification methods, such as fs-verity, based on a single system-wide policy. The file hash used for verifying the signature and the signature, itself, can be included in the IMA measurement list" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: ima_api: Use struct_size() in kzalloc() ima: use struct_size() in kzalloc() sefltest/ima: support appended signatures (modsig) ima: Fix use after free in ima_read_modsig() MODSIGN: make new include file self contained ima: fix freeing ongoing ahash_request ima: always return negative code for error ima: Store the measurement again when appraising a modsig ima: Define ima-modsig template ima: Collect modsig ima: Implement support for module-style appended signatures ima: Factor xattr_verify() out of ima_appraise_measurement() ima: Add modsig appraise_type option for module-style appended signatures integrity: Select CONFIG_KEYS instead of depending on it PKCS#7: Introduce pkcs7_get_digest() PKCS#7: Refactor verify_pkcs7_signature() MODSIGN: Export module signature definitions ima: initialize the "template" field with the default template
| * | PKCS#7: Introduce pkcs7_get_digest()Thiago Jung Bauermann2019-08-051-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IMA will need to access the digest of the PKCS7 message (as calculated by the kernel) before the signature is verified, so introduce pkcs7_get_digest() for that purpose. Also, modify pkcs7_digest() to detect when the digest was already calculated so that it doesn't have to do redundant work. Verifying that sinfo->sig->digest isn't NULL is sufficient because both places which allocate sinfo->sig (pkcs7_parse_message() and pkcs7_note_signed_info()) use kzalloc() so sig->digest is always initialized to zero. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
* | | Merge tag 'for-5.4/dm-changes' of ↵Linus Torvalds2019-09-213-0/+692
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - crypto and DM crypt advances that allow the crypto API to reclaim implementation details that do not belong in DM crypt. The wrapper template for ESSIV generation that was factored out will also be used by fscrypt in the future. - Add root hash pkcs#7 signature verification to the DM verity target. - Add a new "clone" DM target that allows for efficient remote replication of a device. - Enhance DM bufio's cache to be tailored to each client based on use. Clients that make heavy use of the cache get more of it, and those that use less have reduced cache usage. - Add a new DM_GET_TARGET_VERSION ioctl to allow userspace to query the version number of a DM target (even if the associated module isn't yet loaded). - Fix invalid memory access in DM zoned target. - Fix the max_discard_sectors limit advertised by the DM raid target; it was mistakenly storing the limit in bytes rather than sectors. - Small optimizations and cleanups in DM writecache target. - Various fixes and cleanups in DM core, DM raid1 and space map portion of DM persistent data library. * tag 'for-5.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits) dm: introduce DM_GET_TARGET_VERSION dm bufio: introduce a global cache replacement dm bufio: remove old-style buffer cleanup dm bufio: introduce a global queue dm bufio: refactor adjust_total_allocated dm bufio: call adjust_total_allocated from __link_buffer and __unlink_buffer dm: add clone target dm raid: fix updating of max_discard_sectors limit dm writecache: skip writecache_wait for pmem mode dm stats: use struct_size() helper dm crypt: omit parsing of the encapsulated cipher dm crypt: switch to ESSIV crypto API template crypto: essiv - create wrapper template for ESSIV generation dm space map common: remove check for impossible sm_find_free() return value dm raid1: use struct_size() with kzalloc() dm writecache: optimize performance by sorting the blocks for writeback_all dm writecache: add unlikely for getting two block with same LBA dm writecache: remove unused member pointer in writeback_struct dm zoned: fix invalid memory access dm verity: add root hash pkcs#7 signature verification ...
| * | | crypto: essiv - create wrapper template for ESSIV generationArd Biesheuvel2019-09-033-0/+692
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement a template that wraps a (skcipher,shash) or (aead,shash) tuple so that we can consolidate the ESSIV handling in fscrypt and dm-crypt and move it into the crypto API. This will result in better test coverage, and will allow future changes to make the bare cipher interface internal to the crypto subsystem, in order to increase robustness of the API against misuse. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* | | padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possibleDaniel Jordan2019-09-131-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With pcrypt's cpumask no longer used, take the CPU hotplug lock inside padata_alloc_possible. Useful later in the series for avoiding nested acquisition of the CPU hotplug lock in padata when padata_alloc_possible is allocating an unbound workqueue. Without this patch, this nested acquisition would happen later in the series: pcrypt_init_padata get_online_cpus alloc_padata_possible alloc_padata alloc_workqueue(WQ_UNBOUND) // later in the series alloc_and_link_pwqs apply_wqattrs_lock get_online_cpus // recursive rwsem acquisition Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | crypto: pcrypt - remove padata cpumask notifierDaniel Jordan2019-09-131-107/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that padata_do_parallel takes care of finding an alternate callback CPU, there's no need for pcrypt's callback cpumask, so remove it and the notifier callback that keeps it in sync. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | padata: make padata_do_parallel find alternate callback CPUDaniel Jordan2019-09-131-31/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | padata_do_parallel currently returns -EINVAL if the callback CPU isn't in the callback cpumask. pcrypt tries to prevent this situation by keeping its own callback cpumask in sync with padata's and checks that the callback CPU it passes to padata is valid. Make padata handle this instead. padata_do_parallel now takes a pointer to the callback CPU and updates it for the caller if an alternate CPU is used. Overall behavior in terms of which callback CPUs are chosen stays the same. Prepares for removal of the padata cpumask notifier in pcrypt, which will fix a lockdep complaint about nested acquisition of the CPU hotplug lock later in the series. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | padata: allocate workqueue internallyDaniel Jordan2019-09-131-11/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move workqueue allocation inside of padata to prepare for further changes to how padata uses workqueues. Guarantees the workqueue is created with max_active=1, which padata relies on to work correctly. No functional change. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: linux-crypto@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | crypto: skcipher - Unmap pages after an external errorHerbert Xu2019-09-091-19/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | skcipher_walk_done may be called with an error by internal or external callers. For those internal callers we shouldn't unmap pages but for external callers we must unmap any pages that are in use. This patch distinguishes between the two cases by checking whether walk->nbytes is zero or not. For internal callers, we now set walk->nbytes to zero prior to the call. For external callers, walk->nbytes has always been non-zero (as zero is used to indicate the termination of a walk). Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 61cea2599a20 ("[CRYPTO] cipher: Added block cipher type") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | crypto: sha256 - Merge crypto/sha256.h into crypto/sha.hHans de Goede2019-09-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The generic sha256 implementation from lib/crypto/sha256.c uses data structs defined in crypto/sha.h, so lets move the function prototypes there too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | crypto: aegis128 - Fix -Wunused-const-variable warningYueHaibing2019-08-302-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | crypto/aegis.h:27:32: warning: crypto_aegis_const defined but not used [-Wunused-const-variable=] crypto_aegis_const is only used in aegis128-core.c, just move the definition over there. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 19:34:18 +0000